|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC60065 Figure 11, IRAM 4229 | Application: | Dricet Plug-in Equipment |
|---|---|---|---|
| Material: | Steel | Shipment: | By Express |
| High Light: | electrical plug tester,torque testing equipment |
||
Torque Tester Apparatus for Direct Plug-In Equipment with Different Adaptors According to IEC60065
1. Introduction
The torque tester apparatus is designed according to IEC60065, it is a test to check various elements that are connected to sockets. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.
Compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in figure 11. The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet.
With the device not in engagement, the balancing arm is in equilibrium, the engagement face of the socket-outlet being in the vertical position.
After the device has been engaged, the torque to be applied to the socket-outlet to maintain its engagement face in the vertical plane is determined by the position of a weight on the
balancing arm.
The torque shall not exceed 0,25 Nm.
2. Parameters
| Material | steel |
| Distance | 8 mm behind the engagement face of the socket-outlet |
| Weighs |
2.5N 1N |
| Adapters |
all-purpose plug for GB and BS plugs UL plug AS/NZS plug |
| According to | IEC 60065, IRAM 4229 |
IEC60065 Figure 11
Contact Person: Ms. Penny Peng
Tel: +86-18979554054
Fax: 86--4008266163-29929
